- Create account
You are here
Working At Heights Courses
Confined Space Training
- Create new account
- Request new password
- Working at Heights Courses
You are a domestic student if you are an:
- Australian citizen (including dual citizens), or
- New Zealand citizen (including dual citizens), or
- Australian Permanent Resident, or
- Australian Permanent Humanitarian Visa
You are an international student if you don't fall under any of the domestic student requirements.
Work Safely At Heights Course Code HSSRII0001
Full time 1 day
Various dates throughout the year
At your Workplace, Drummond St Chadstone
This Work Safely At Heights short course is designed for employees required to work safely at heights in resources and infrastructure, civil construction and construction industries.
Studying the Work Safely At Heights at Holmesglen
Holmesglen delivers the unit of competency: RIIWHS204E Work safely at heights.
It includes: Identifying the work requirements Work procedures and instructions for the task Accessing and Installing equipment Performing work at heights Cleaning up the work area
This course is also available for corporate clients. Group bookings of 10 or more can be offered at a discounted daily rate at our campus or at your location.
Talk to us to discuss tailored training packages that meet your requirements.
Course structure
This accredited skill set is made up of one unit of competence RIIWHS204E Work Safely at Heights chosen by Holmesglen based on feedback from industry and staff qualifications.
Assessments are designed to provide learners with opportunities to demonstrate they have attained the required skills and knowledge using a range of practically based activities and tasks, as required by recognised standards.
Entry requirements
A basic command of the English language, both written and verbal, is recommended. Participants may be asked to complete a language and literacy test before being offered a place in the course. Photo ID must be presented i.e. current driver’s licence or passport Basic Numeracy and Literacy skills Minimum 15 Years of age Personal Protective Equipment (PPE): Long pants, long sleeve shirt and safety boots to be worn during training Participants are required to pass a practical and theoretical assessment
A USI number is to be obtained before the start of the class.
There are no prerequisites for this course.
Apply online. A pre-training review (over the phone) and language and literacy test may be required.
COVID-19 vaccination requirements Please refer to our coronavirus update page to view current vaccine requirements.
Qualification and recognition
Upon completion of this unit, participants will be issued a Statement of Attainment of RIIWHS204E Work safely at heights and a Holmesglen-produced Industry Card (NB - Industry standards suggest this unit should be updated every two-years).
Holmesglen tuition fees shown are all inclusive and indicative of the cost to complete the entire course.
Holmesglen may engage third parties to recruit students on behalf of the institute. Third party recruiters receive a commission and this will not impact on your fees.
Find out more about your rights and obligations as a student and the services we provide at Holmesglen.
Enquire online
eg: When does the course start?
All information is correct at the time of printing but subject to change.
Copyright © 2020 Holmesglen CRICOS Provider Code: 00012G RTO-0416 ABN: 40 096 756 729
- Basic Working at Heights Course (WHB)
- Training Courses
- Working At Heights Training Courses
What is the Working at Heights Course?
This training is designed to equip learners with the knowledge, skills and attitudes to work at height safely, thereby minimising the risk and increasing chances of survival should a fall occur.
CERTIFICATE VALIDITY
- Definitions
- Legislation pertaining to Height Safety
- Risk Assessments
- Fall Protection Plans
- Types of PPE
- Height Safety PPE
- Identification and utilization
- Categories of work
- Fitment and Inspection
- Suspension Trauma
PRE-REQUISITES
- English read/write proficiency.
- Local language instructors are available on request for groups of 10+.
VENUE LOCATIONS
- Available at all Emcare branches.
- Available at your premises for groups of 10+.
QUALITY ALIGNMENT
Certifications available, included in course.
- A4 certificates.
- Learner manuals.
- Training equipment.
- Presentation equipment.
- For training at your premises travel/accomodation charges may apply.
Related Courses
- Basic Fall Arrest Course (BFAT)
- Fall Arrest & Basic Rescue Course (FAT)
- Fall Protection Plan Developer Course
- Portable Ladder Course
- Climbing Equipment Inspection & Maintenance Course
- Scaffolding Erectors Course (SE)
- Scaffolding Inspector Course (SI)
Next Course Up
Accreditation & affiliates.
GET IN TOUCH
There are a few ways to reach us below. Please feel free to contact us via phone, email or you can send us a message via the form provided and we will get back to you.
- Forensic Accounting
- Construction Management
- Project Management
- Fashion Design
- Supply Chain Management
- Accounting and Finance
- Business Studies
- Hotel Management
- Diet and Nutrition
- Beauty Therapy
- Customer Services
- Interior Design
- Public Relations
- Event Management
- Health and Safety
- Risk Management
- Trainer Courses
- Environmental Management
- Leadership & Management
- Wedding Planning
- Facilities Management
- Admin, Secretarial & PA
- Travel and Tourism
- Cyber Security
- Human Resource Management
- Life Coaching
- Warehouse Management
- Digital Marketing
- Logistics Management
- Teaching Assistant
- Bookkeeping
- Food Hygiene
- Counselling Skills
- Security Management
Working at Height (Short Course)
- Course Overview
- Learning Outcomes
- Certification
Why Study Working at Heights?
It is the responsibility of every employer, manager and supervisor to take all reasonable steps to safeguard their employees. This includes ensuring that every worker is provided with sufficient training to work safely at heights, in accordance with The Work at Height Regulations 2005. A detailed knowledge and understanding of workplace health and safety principles is essential to prevent work-related accidents, injuries and deaths. Working at height means performing any function in an elevated position, where precautions must be taken to safeguard workers. This extends to scaffolds, ladders, stages and raised platforms, along with any work that takes place alongside a deep trench. The purpose of this course is to empower employers and employees alike with the knowledge, skills and confidence needed to contribute to a safe and healthy working environment.
By the end of this course the learner will be able to:
- Discuss how to work on a ladder or a flat roof;
- What could fall through a fragile surface;
- What could fall into an opening in a floor or a hole in the ground
All free online certificate courses at Oxford Home Study Centre are 100% free of charge from start to finish. There is no enrolment fee, all study aids are provided via our online learning platform and all of our courses are self-paced for total flexibility.
Our exclusive free courses provide the perfect opportunity to expand your knowledge, develop new skills and explore new professions. Upon completion of your free online certificate course, you will have the option of claiming one of three different types of certificates for a small fee:
- An official Course Completion Certificate from Oxford Home Study Centre
- A CPD Accredited Certificate to boost your CPD profile
- An Endorsed Certificate issued by the Quality Licence Scheme
Each of these certificates could prove helpful in supporting future job applications, or helping you climb the career ladder with your current employer. All certificates are 100% optional upon successful completion of your course - available to purchase with your preferred postage option.
For more information on certificate costs, head over to our pricing page or contact a member of the team at Oxford Home Study Centre anytime.
COURSE CONTENT
Topics covered in the course.
Working at Heights short course covers the following key topics:
- Construction Safety - Introduction
- Construction Safety - Who do the Regulations Apply to?
- Construction Safety - Which surfaces present a particular risk?
- Construction Safety - Safe Use of Ladders
HOW IT WORKS
Enhance your skills with our highly informative courses.
Pass the assignments by getting the required marks.
Get certified and enhance the worth of your CV.
WHY GET CERTIFIED
Once you get certified, employers have more trust in your capabilities. You can easily add the certification to your credentials and share it everywhere.
Becoming a certified professional gives the impression that you have better skills and you are committed to enhancing your skills. As a result, your chances of getting hired got increased.
Enhancing your understanding and knowledge is the key to get hired, achieve a higher position, and pursue a new career.
RELATED COURSES
Covid-19 coronavirus (short course), fire safety (short course), first aid (short course), planning for health and safety (short course).
Student Feedback
Course info.
Working at Heights Online Course
Minimise risks in the workplace with our working at heights online course.
Our working at heights online course recognises the national measures for working at heights safely, and gives candidates the knowledge to plan, select and use the correct equipment.
Course duration: Between 2 and 2 ½ hrs depending on learning speed.
Course format: Three video training modules, with a multiple-choice section at the end of each module.
On completion your training certificate is valid for three years and is recognised by local authorities and corporate employers throughout the UK.
All training certificates can be verified by employers or others to prove that they are genuine, by clicking Validate a Certificate and typing in the certificate number.
Working at Heights Online Course Overview
Many people think modern access equipment totally removes risks and prevents people suffering injury while working at height. This is not the case, and this training is designed to teach candidates the dangers of high level working and how to do it safely by selecting and using the right access equipment for the task in hand.
- This online working at height course gives employees a broad understanding of the importance of safe working practices and current legislation.
- It covers the essential awareness, duties and reasons for the Health and Safety at Work Act 1974.
- It will give employees a good understanding of the Working at Height Regulations 2005.
- Candidates will learn the fundamental knowledge of risk assessment and control measures.
- It will provide employees with an outline understanding of The Provision and Use of Work Equipment Regulations 1998.
- This online training conveys the bedrock principles of The Lifting Operations and Lifting Equipment Regulations 1998.
- It evaluates the importance of choosing the correct access equipment, knowing safe working limits and the basic checks to carry out before use.
- It teaches candidates the statistics from accidents when something goes wrong.
About our Online HSE Courses
- Available online 24/7, across all devices.
- 85% first time pass rate.
- Unlimited access to course materials and free resits.
- Certificate Of Training upon successful completion of the course.
Why Choose Our Working at Heights Course?
Changing a light bulb, standing on a hop-up or working on a scaffold all require access equipment. Consequently, all are described as working at height. The measured distance a person is from a floor isn’t a consideration for the working at height regulations. Instead they state that someone is working at height if the distance is great enough for a person to suffer personal injury should they fall.
Most, if not all of the fatalities and the 40,000 injuries experienced each year by people falling from a height in the workplace, could have been avoided. Our online training focuses on instilling essential knowledge that can help to prevent accidents by minimising risks through good planning and proactive approaches.
If you work at a height, or plan jobs working at a height, this course is an indispensable tool that will provide you with the knowledge you need for working at heights safely.
Is Our Working at Heights Course For You?
Our online working at heights course teaches the importance of thinking through and assessing situations before carrying out tasks.
- It's not just designed to meet employer's legal requirements but to brief people on what happens when things go wrong and how to avoid bad practices.
- Special attention is given to the planning, risk and control measures of any task that involves work at height.
- Our training course will help you consider environmental factors such as lighting and ground conditions when planning work.
- Our course will teach you about safe use of ladders and step ladders.
The Aims of our Working at Heights Online Course
The importance of learning how to work at a height safely can't be stressed enough. It’s the biggest killer in the workplace, yet could be avoided if people followed the steps in this course to plan and work safely.
The aims of our working at heights online course are to show candidates what steps need to be addressed prior to work being carried out, and only if work at a height can’t be avoided.
It will instruct employees to think about work objectives, carry out a risk assessment, and plan a suitable method for carrying out a task safely, with consideration to all elements that may pose risk.
The course shows how to select equipment for protection and access, as well as selecting appropriate equipment that is suitable for the nature of the work. It will also teach candidates to consider foreseeable loadings and safe passages that do not pose risk to either workers or passers-by.
It will pay special attention to the correct and incorrect use of ladders and step ladders.
What are the Benefits From Taking a Working at Heights Online Course?
When it comes to fatalities, falls from height at the workplace top the league with over 35 deaths a year and over 40,000 non-fatal injuries. This training course gives employees the facts on how dangerous working at height can be if it's not carried out in the correct manner, with the correct planning and appropriate access equipment. It will help employees work safer by making them aware of the hazards and giving them key knowledge of current legislation and the reasons for the legislation.
It will detail the independent duties placed on an employee, the self-employed, and people that control the work of others.
Encourage your staff to get their working at heights certificate today with our cost-effective training solution that is available 24/7 across all major platforms. Be safe and book your course today.
Assessment and Training Certificate
For ease of use the training course is split into three modules with a Q&A multiple choice section at the end of each module.
The pass rate for each module is 85% and you have to pass each module to move onto the next.
If you don't pass a module first time, you are given as much access to the course material as you need in order to meet the required standard.
Once you have completed the course, you will have instant access to your training certificate which is recognised by Environmental Health Officers and local authorities.
Your working at height certificate is valid for three years.
A sample of some customers we're proud to train
Direct links, our company, our quality, our policies.
© 2012 HSE Docs
Secure design by Webforward
Work Safely at Heights
Have a question or want to enrol.
NOTE: Current Course Code: RIIWHS204E
Course Outline
The work safely at heights course covers working safely at heights in resources and infrastructure industries. This nationally accredited course covers the safe working practices when working at heights or depths, and is appropriate for those working in an operational role, at worksites within:
- Civil construction
- Metalliferous/ Coal mining and Drilling
- Extractive industries
The work safely at heights course can be completed as a Full course for someone who has never done it before or as a refresher course for those who have done it before but need their SOA current within two years for industry requirements. For the refresher course information visit the ‘ Work Safely at Heights Refresher page ‘.
Entry Requirements
- Basic verbal and written English communication skills sufficient to read material and understand instruction.
- A Unique Student Identifier number (USI)- if you don’t have one go to- usi.gov.au
- Provide photo identification.
- Wear closed in shoes.
- Sun protection is also recommended (hat, long-sleeved shirt and pants).
- Pass a language, literacy, and numeracy assessment (LLN) if applicable.
Also due to the physical nature of the unit of competency learners must be of fit and able capacity to work at heights and wear the required PPE.
Course Details
How long will the training take (duration).
The training and assessment of the [email protected] course are competencies based so the time of the course is dependent on a learner’s previous experience, capabilities, and abilities.
The typical duration of this full Working at Heights course is 1 day. A Work Safely at Heights Refresher Course is also available with us. Click Here to check out that info.
How is the Training Delivered ( Delivery Modes)
FULL COURSE TRAINING – Practical and theory training based on theoretical concepts and set tasks that need to be completed. The learner is then given a theory and a practical assessment.
Designed for all types of learners giving them access to the equipment and skills required to be competent in the practical skills and knowledge of working in a confined space in a very focused one on one or small group environment.
Step 1 – Completion of theory training and assessment. Step 2 – Learner completes practical training and assessment. Step 3 – Upon successful completion of the course and full payment learner is issued a Statement of attainment.
Please note : A proof of training card can be issued for an additional cost.
What will you learn? (Overview)
The Work in Confined Spaces course will cover the below topics: – Identify work requirements – Identify work procedures and instructions – Access and install equipment – Perform work at heights – Clean up the work area
As well as learn to : Plan and prepare for working at heights, Apply a working knowledge of OHS & regulatory requirements, Identification and control of risks Inspection, use, and maintenance of harnesses and lanyards, Care of equipment, Demonstration of nominated rescue procedure, Identification and use of rescue equipment.
For more specific course information please contact us or go to https://training.gov.au
Course Outcome
To complete the course, students must successfully complete all assessments which are aligned with the national unit of competency.
Upon successful completion of the course requirements, students will receive a nationally recognised Statement of Attainment (SOA).
Your Statement of Attainment does not have an expiry date, however, as the training packages evolve and change over time some employers may require you to be VOC’d or refresh your competency to retain your currency.
Generally, Working at Heights is required to be within 2 years to satisfy currency requirements.
How long will training take?
Typically the training and assessment is competency-based and is a 1 day course.
Please Note-Total time is dependent on the competency of each individual.
How is the training delivered?
Training and assessment are both practical and theory-based delivery.
How long does your [email protected] last for?
The industry generally recommends that your [email protected] ticket or SOA is refreshed every 2 years to remain current.
Some of Our Partners
Related Courses
Working at heights refresher.
Course Outline The work safely at heights course refresher covers...
Work in Confined Spaces
Confined Spaces Ticket - Course Outline This enter and work...
EWPA Yellow Card
Course Outline The EWPA Yellow Card Course (EWP) is designed...
Course Outline The Operate elevating work platform course (EWP) also...
EWP Licence Over 11m
Course Outline The nationally accredited Operate a Work Platform (WP)...
Confined Space Refresher
Course Outline This enter and work in confined spaces refresher...
©2023 A Co provider of RTO Civil Safety No. 32381
Privacy Policy | Terms & Conditions | Professional Training Solutions is a third-party provider of Registered Training Organisation Civil Safety (RTO number 32381)
Website Design & Development by The Creative Collective .
- 041 578 9820
- [email protected]
- Mon – Fri: 9:30 AM — 5:30 PM
Civil Construction Skillset
$1200 $1500
Construction Skillset
Tunnel ready skillset, our courses are provided under aupice with the scaffold tool and training company rto#22226.
Confined Space Ticket $220
Gas Test Atmospheres $150
Traffic Training $180
Breathing Apparatus
Working safely at heights $199
Forklift Training Course $500
Basic Scaffold Training Course $1190
EWP Training Under 11m $300
MWAH: MANAGE WORK AT HEIGHT
MANAGE WORK AT HEIGHT
Written Test & Practical Test
This course is for you if you are involved in the supervision, assessment or management of work at height activities.
- Course Overview
This course has been designed to meet the minimum standard for working-at-height Training for Supervisors, Assessors or Managers in Singapore, as recommended in the WSH (Work at Heights) Regulations 2013 and the Approved Code of Practice for Working Safely at Height (2011).
Next available schedule
- Course Objectives
- Identify, explain and apply the relevant Workplace Safety and Health (WSH) Legislation/Approved Code of Practice/Singapore Standards applicable to work at height
- Identify and explain the Roles & Responsibilities of stakeholders, competent and responsible persons.
- Identify hazards, evaluate the risk, and implement control measures for WAH activities
- Review the necessary fall preventive / protective control measures for safe execution of WAH activities
- Establish, evaluate, review and implement a Fall Prevention Plan
- Establish and implement a system for effective monitoring and control of WAH risks
- Don, check and correct Individual Fall Protection Equipment and respond to a fall emergency
- Pre-requisites
You should have at least WSQ ESS Workplace Literacy and Numeracy Level 4 and above or equivalent to carry out hazards identification, risk assessment, and risk control measures.
- Course Outline
- Legal requirements, Approved Code of Practice and Standards for WAH
- Roles and Responsibilities of various stakeholders
- Risk Management
- Fall control measures
- Fall Prevention Plan (FPP)
- WAH Implementation and Monitoring Programme
- Individual Fall Protection equipment and first line response in emergency
- Certificate Obtained and Conferred by
Results will be released 10 working days after course ends. Upon completion of the course and passing the examination, an e-Statement of Attainment (SOA) from SkillsFuture Singapore (SSG) and a Safety Pass from NTUC LearningHub will be awarded to you.
- Additional Details
Medium of Instruction & Trainer
Trainee: Trainer Ratio 1:20
Additional Note
Please note:
- Trainees must bring their own Safety Shoes. Trainees will not be allowed to take part in the practical session if they do not have safety shoes.
- 100% attendance is required
TPG Code: TGS-2022013149
Funding Eligibility Criteria:
Terms and conditions apply. NTUC LearningHub reserve the right to make changes or improvements to any of the products described in this document without prior notice.
Prices are subject to other LHUB miscellaneous fees .
Course Code
Please contact us through our enquiry form if there are no schedules available.
What Others Also Enrolled In
PERFORM WORK AT HEIGHT
PERFORM WORK AT HEIGHT - BENGALI
PERFORM WORK AT HEIGHT - MANDARIN
PERFORM WORK AT HEIGHT - MALAY
PERFORM WORK AT HEIGHT - TAMIL
PROTECTED AREA
This content is password-protected. Please verify with a password to unlock the content.
(416/877) 410-1855
24/7 (no shift premiums), working at heights courses, about working at heights courses, are working at heights courses mandatory.
Email (required) *
Company Name *
Phone Number
Number of Employees
Looking To Schedule a Working at Heights Course?
Call (416/877) 410-1855 or email [email protected], who needs working at heights courses.
- Approved by the Ministry of Labour’s Chief Prevention Officer
- Delivered by a course provider who has been approved by the Chief Prevention Officer
- Taken before a worker can use fall protection
- Travel restraint system
- Fall restricting system
- Fall arrest system
- Safety belt
How Long Are Working At Heights Courses Valid For?
- A copy of the worker’s proof of completion document
- A record that includes the: worker’s name, approved course provider’s name, name of the approved course, the date on which the course was successfully completed
What Height Is Considered Working At Heights and Require Fall Protection?
- Work above ground/floor level
- Could fall from an edge, through an opening or fragile surface or
- Could fall from ground level into an opening in a floor or a hole in the ground
- Work at height does not include a slip or a trip on the level, as a fall from height has to involve a fall from one level to a lower level, nor does it include
- Walking up and down a permanent staircase in a building
Proof of Course Completion
- the Chief Prevention Officer
- a course provider who has been approved by the Chief Prevention Officer
- Access a worker's course information, with the worker's consent, by creating a free and secure account through SkillsPass™ .
- With the worker's consent, contact the Ministry of Labour to confirm that the worker's course is valid.
- the address provided when you registered for training
- year of birth
- email address and phone number (mobile, if possible)
To Replace a Lost or Damaged Record
- get your digital record online from SkillsPass™ – it can be shared and printed
- contact your training provider to obtain a copy of your training records or proof of successful completion document
Looking To Schedule a Working at Heights Course?
Elevated Work Platform Training
Public/Off-Site Elevated Work Platform Training
Fall Protection Training (Industrial)
Public/Off-Site Fall Protection Training (Industrial)
Lift Truck Training
Lift Truck Refresher Training
Powered Pallet Truck Training
Walkie Stacker / Powered Pallet Training
Public/Off-Site Lift Truck Training
Loader / Skid Steer Training
Loader / Skid Steer / Backhoe Training
Loader / Backhoe Training
Public/Off-Site Loader / Skid Steer / Backhoe Training
0 – 8 Ton Mobile Crane Training
0 – 8 Ton Mobile Crane Refresher Training
Public/Off-Site 0 – 8 Ton Mobile Crane Training
Overhead Crane Training
Overhead Crane Refresher Training
Public/Off-Site Overhead Crane Training
WHMIS 2015 (GHS) Training
WHMIS 2015 (GHS) Refresher Training
Working at Heights Training (Construction)
Working at Heights Refresher Training (Construction)
Public/Off-Site Working at Heights Training (Construction)
Public/Off-site Working at Heights Refresher Training (Construction)
Lift Truck Practical Trainer
Overhead Crane Practical Trainer
0-8 Ton Mobile Crane Instructor
0-8 Ton Mobile Crane Refresher Instructor
Basic Fall Protection Instructor
Basic Hoisting Instructor
Elevated Work Platform Instructor
Lift Truck Instructor
Lift Truck Refresher Instructor
Loader Skid Steer Instructor
Overhead Crane Instructor
Overhead Crane Refresher Instructor
Powered Pallet Truck Instructor
Walkie Stacker – Powered Pallet Truck Instructor
Working at Heights Instructor
booking type
Fall Protection Training
Working at heights training, working at heights refresher training, mobile crane training.
- LOADER | SKID STEER | BACKHOE TRAINING
Practical Trainer/Instructor
Instructor/train the trainer program, whmis 2015 (ghs) training program.
- ELEVATED WORK PLATFORM TRAINING
- FALL PROTECTION TRAINING
- FORKLIFT | LIFT TRUCK TRAINING
- MOBILE CRANE TRAINING
- OVERHEAD CRANE TRAINING
- POWERED PALLET | WALKIE STACKER
- PRACTICAL TRAINER COURSES
- TRAIN THE TRAINER COURSES
- WORKING AT HEIGHTS TRAINING
- WHMIS TRAINING
- WHMIS Training
- TDG Training
- Confined Space Training
- Asbestos Training
- Personal Protective Equipment
- Arc Flash Hazard Training
- Full Course List
- SAFETY PRODUCTS
Workplace Health and Safety Training, Consulting and Equipment available in Ontario, Canada
905-661-safe (7233), [email protected], head office, 205 nebo road | unit 4a | hamilton | on | l8w2e1, working at heights (full course).
From: $ 199.99
Working at Heights (Full Course) Information: Course Time: 8:00 AM-4:30 PM (8.5 Hours)
Times are in America/Toronto
- Choose a date above to see available times.
Description
Additional information.
Working at Heights
Course Code: WAH-01
Course Objectives:
Upon completion of training, participants will understand the following:
Construction Regulations with regards to Working at Heights Recognize, Assess and Control hazards associated with Working at Heights Fall Protection systems and their components Rescue and Emergency Procedures Equipment maintenance and storage Completion of practical portion of inspecting fall protection systems and their components Don and Doffing of full body harnesses , lanyard placement Practical evaluation of Travel Restraint, Achieving 100% Tie-off.
Related products
Elevated Work Platform New Operator $299.99
Working at heights – (renewal course).
- Light Rigid
- Medium Rigid
- Heavy Rigid Auto & Sync
- Heavy Rigid Non Sync
- Heavy Combination
- Scissor Lift Course
- Working at Heights
- Dogman Ticket
- Elevating Work Platform Ticket
- Forklift Licence
- Excavator and Skid Steer
- Excavator Ticket
- Front End Loader Ticket
- Load and Unload Plant
- Roller Ticket
- Skid Steer Ticket
- Truck Mounted Attenuator Training
- Electrical Spotters
- Traffic Control
- Traffic Management
- Traffic Refresher Course
- White Card Interpreter Services
- Caravan Towing Courses
- First Aid Course
- Silica Awareness Training
- Course Calendar
- Book Online
LEARN - TEST - BE SAFE
Working at Heights Course
Working at Heights with COVE is your Safest option
Your Safety is our Business
Book ONLINE Today
Working at Heights Course Structure
Working safely at heights – RIIWHS204E
Course Fees
- $235.00 – If you Book and Pay online
- $270.00 – If you call COVE Training on 03 8773 9000
Working at Heights Course Delivery
This course is delivered over 1 day (8-hour) in a classroom and warehouse based setting from our Dandenong and Thomastown sites.
Click here for dates.
Here's what you’ll learn
- This nationally recognised course covers theoretical and practical aspects of working safely at heights.
- During the course we will assist you to develop safe work method statements and risk assessments for working at heights.
- All workers who conduct or supervise tasks whilst at height will find this course beneficial to workplace safety.
- This course will enable you to comply with current WHS legislation with successful trainees receiving a nationally recognised Statement of Attainment.
This course is designed to equip workers with the knowledge and skills to safely work in any height situation, primarily being aimed at general construction, maintenance, mining, large factories or other work situations where work is conducted in a place where a fall from one level to another is possible.
Course Outline
- Regulations and legislation
- Australian Standards
- Risk assessment and hazard elimination
- Equipment selection and use
- Anchor systems, selecting solid and reliable anchorage
- Fall restraint systems, selection of equipment and correct use
- Work positioning systems, selection of equipment and correct use
- Fall arrest systems
- Using energy absorbing lanyards
- Correct use of ladders and ladder safety training
Upon successful completion of this course, students will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised.
Pre-Requisites
- Applicants must be at least 15 years of age.
- COVE Training does not have CRICOS accreditation and is unable to train students on an ‘International Student’ VISA.
Assessment Process
This course incorporates a variety of assessment tasks throughout and may include:
- Observation / Demonstration
- Practical hands on
- Questioning
Pathways Forward
- Certificate III in Civil Construction
- Certificate III in Scaffolding
- Construction Crane Operation Certificate III
Course Guide
Working safely at heights
Ready To Start Working at Heights
4.9 Rated 4.9 out of 5 4.9 out of 5 stars (based on 1988 reviews)
The trainer was great explained everything nice and clear and made sure we could all follow what he was talking about.
Heavy Truck license
Great trainers with a wealth of knowledge
The Forklift course was run very professionally
The course was well run with the trainer Scott ,
easing the students through the theory part of the course with his very professional approach. I would definitely recommend Cove to all .
More Short Courses by COVE
We are here to help
Call COVE 03 8773 9000
TRAFFIC CONTROL
- 1300 990 810
- Student Login
- QLD Brisbane Gold Coast SE QLD Central QLD
- VIC Melbourne
No region selected
- Working at Heights - 1 day
Face to Face
Equips workers with the knowledge and skills to safely work at height in various situations. 100% face-to-face training.
If eligible, NSW employers may be able to part-fund or fully-fund the cost of this course for their staff through the Smart and Skilled initiative
Course Dates
Course details, certification.
Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Pinnacle Safety and Training (RTO 40496).
National unit of competency
- RIIWHS204E - Work safely at heights
Course Duration
1 day (approximately 8 hours)
- $239.00 pp for public courses. Book online and save $10.00! (scroll up, find your date, and click Book Now)
- For group bookings outside our public course schedule or at your location, please submit your group booking enquiry here for an obligation free quote.
Course Overview
Pinnacle Safety and Training train more people to work safely at heights than any other provider in Australia.
This nationally recognised course covers theoretical and practical aspects of working at height.
During the course we will assist you to develop safe work method statements and risk assessments for working at height. All workers who conduct or supervise tasks whilst at height will find this course beneficial to workplace safety. This course will enable you to comply with current WHS legislation with successful trainees receiving a nationally recognised Statement of Attainment.
Training can be conducted at your work site or off-site at one of our purpose built training facilities. Work at heights training is focused on fall prevention rather than fall arrest. It is designed to equip workers with the knowledge and skills to safely work in any height situation, primarily being aimed at general construction, maintenance, mining, large factories or other work situations where work is conducted in a place where a fall from one level to another is possible.
Pinnacle Safety and Training recognises that whilst there is a standard set of learning outcomes for this course, the context and environment in which the learning is applied is varied. We will always customise the course to suit your unique workplace requirements. Training covers risk assessment, selection and correct use of equipment, rigging and of anchor systems, fall restraint, work positioning and fall arrest systems.
For supervisors of work at height or anyone needing to develop rescue plans , please consider undertaking Working at Heights - 2 day training. Remember: Having a tested, effective rescue plan for all work at heights where a fall is possible is the law!
Course Outline
- Regulations and legislation
- Australian Standards
- Risk assessment and hazard elimination
- Equipment selection and use
- Anchor systems, selecting solid and reliable anchorage
- Fall restraint systems, selection of equipment and correct use
- Work positioning systems, selection of equipment and correct use
- Fall arrest systems
- Using energy absorbing lanyards
- Correct use of ladders and ladder safety training
Course Inclusions
- Training conducted by experienced Height Safety Specialist
- One 8-hour day of training. Up to 12 trainees per course. A typical course runs from 0730-1730
- Knowledge on relevant legislation and Australian Standards for working at height
- Recommendations and advice for specialised PPE and equipment for your particular workplace
- Advice on risk control methods for the type of work at height to be undertaken
- Plenty of practical hands on training to ensure workers can be safe at height
Each Trainee Must Provide
Participants must
- Be at least 15 years of age
Equipment requirements
- We supply all equipment necessary for you to undertake training including harnesses etc.
- We encourage you to bring along your own equipment.
For our public courses at our purpose built training facility trainees must provide:
- Appropriate clothing, closed-in footwear.
- Working at Heights - Online Theory + Half Day Practical
- Working at Heights - 2 day
- Working at Heights and Confined Space Combined
- Elevating Work Platform (EWP) Under 11m
- Elevating Work Platform (EWP) Over 11m
- Rope Access Training (IRATA)
- Tower Climbing & Rescue Training
- Height Safety Equipment Inspection
- Tower Rescue Refresher
- Vertical Rescue
- Stormseal Accredited Installer
Corey is an excellent facilitator! His knowledge, presentation, and persona made the Working at Heights course very interesting and engaging for all participants. The Pinnacle training facility in Sydney is one of the best I’ve attended in Australia.
Kevin L. - Sydney, NSW
Excellent work running this on a Saturday. Certainly fitted in well with the self-employed and small business guys. I will recommend this to the other guys I work with who live in Brisbane.
David W. - Brisbane, QLD
Student links.
As a new entry level person I was made to feel a part of the group and class. The trainers ensured I was up to speed with the group and answered all my questions and more importantly encouraged me to ask questions. The training keeps you very interested and keyed into the subjects you’re learning. I did the Work Safely at Heights course and learned so much! The best part was also to see guys who were in the mining / construction sectors just doing a refresher course also learning new and updated things and they were kept on their toes with the trainers expertise. I have a major fear of heights but with the help of my trainers who encouraged me throughout the entire practical part of the course I was able to complete everything required. They were patient and extremely helpful. An excellent course with excellent trainers - I would highly recommend Pinnacle Safety and Training to anyone.
John R. - Hammond Park, WA
Course Category: Working at Heights
Working at heights stage 1.
Working at Heights Stage 1 is available online or delivered in-person by one of our experienced tutors. Our training course will provide you with the knowledge to ensure that you understand your responsibilities and understand how to work safely at height. Did you know that Investigations by the Ministry of Business, Innovation and Employment into falls while working at height show that more than 50 percent of falls are from less than three metres and approximately 70 percent of falls are from ladders and roofs? The cost of these falls is estimated to be $24 million a year – to say nothing of the human cost as a result of these falls. If you use a fall arrest harness to work at height you may need Working at Heights Stage 2. For those who are required to supervise others working at height and/or set-up a fall arrest system you will require Working at Heights Stage 3
Considering online training but still not sure that it will work for you?
- Check out this short demo video to see how easy it is – Demo Video
- Dedicated tutor support available via email and phone
- Courses developed to ensure learners are successful with their assessment – 99% success rate
- Sign in and out of the course as it suits you – your course on your schedule
- No time-limit to complete the course
- Every course has a ‘Nuts and Bolts’ page with guidance on how to use the course
The BeSafe Guarantee for online courses
We are so confident that you will be satisfied with your online BeSafe course that we will happily refund 100% of the course fee if you are not satisfied. See T’s & C’s
Working at Heights Stage 2
Working at Heights Stage 2 is available online followed by a practical session or delivered in-person by one of our experienced tutors. If you work at height using a fall arrest harness it is important that you have the correct training to perform the task safely and understand the risks involved. Our training course will provide you with the knowledge and hands on experience to ensure that you understand your responsibilities and have the skills to work safely at height. For those who are required to supervise others working at height and/or set-up a fall arrest system you will require Working at Heights Stage 3
Working at Heights Stage 3
Working at Heights Stage 3 is available online followed by a practical session or delivered in-person by one of our experienced tutors. If you are supervising others work at height using and setting up a fall arrest system it is important that you have the correct training to perform the task safely and understand the risks involved. Our training course will provide you with the knowledge and hands on experience to ensure that you understand your responsibilities and have the skills to work safely at height.
NB: 25045 is available as an additional unit standard – select the appropriate ticket when booking
Working at Height I Refresher
The Working at Heights Refresher is available online or delivered in-person by one of our experienced tutors. Note that this is refreshing NZQA unit standards that you have already completed in this area. If online, it can be completed in your own time, at your own pace. An assessor will verify your competency in this area at the completion of this course.
Height Safety Equipment Inspector
All height safety equipment must be inspected prior to use by the user as well as by a Height Safety Equipment Inspector prior to use and at intervals specified within the relevant standard. This course will provide you with the skills and knowledge to be able to conduct the routine visual inspections of height safety equipment.
Course outcomes:
- Identify industrial rope access equipment.
- Identify manufacturers’ maintenance instructions.
- Identify manufacturers’ maintenance specifications.
- Inspect and reject damaged and/or worn equipment.
- Carry out maintenance procedures in accordance with manufacturers’ specifications.
- Record equipment inspections in log book.
- Record maintenance procedures in log book
NB: this course will not provide you with authorisation to conduct internal inspections or servicing of fall arrest blocks, this type of training is typically provided by the manufacturer to authorised personal.
Pole Top Rescue
Carry out a rescue from an electrical structure
People credited with this unit standard are able to: describe procedures for rescue from an electrical structure; carry out rescue of a victim from an electrical structure; and report rescue from an electrical structure.
Pre-requsuites
Unit 23229, Use safety harness system when working at height
Unit 10509, Climb and work on electricity network structures
Unit 26551, Provide first aid for life threatening conditions
Unit 26552, Demonstrate knowledge of common first aid conditions and how to respond to them; or demonstrate equivalent knowledge and skills.
Address: 1B Beatrice Tinsley Crescent, Rosedale, Auckland 0632 + Google Map
Phone: +64 9 555 2365
Email: [email protected]
This website has been developed for modern browsers. To view this website please update your browser here browsehappy.com . Thank you.
- Delivery Types
- Measuring the Effectiveness of Health and Safety Training
- Partners in safety
- Confined Space
- ConstructSafe
- Fire Safety
- Health & Safety
- Mobile Elevated Working Platform
- NZ Certificates
- Online Courses
- Schools | Gateway
- Working at Heights
- SIMULATOR TRAINING
- Online Course Login
IMAGES
VIDEO
COMMENTS
Full Working At Heights Course Duration: 8.0 hours Cost: $200+HST/per person Refresher Working at Heights Course Duration: 3.5 hours Cost: $150+HST/per person On-Site Working at Heights Course On site courses at your location are easily arranged with all materials and equipment provided, call 226 208 7511 to set up dates, or fill in the form below.
Working At Heights CoursesConfined Space Training. Working At Heights CoursesConfined Space Training Skip to main content ... 226 208-7511. Menu. Home; About; Courses. Working at Heights Courses; Contact; You are here. Home » Courses. Courses. Working At Heights Courses. Confined Space Training. Home; About; Courses; Contact; APLAK Safety and ...
Work Safely At Heights Course Code HSSRII0001 For Local Students Local students International students Duration Full time 1 day Intakes Various dates throughout the year Campus At your Workplace, Drummond St Chadstone 9564 1546 enquire online Overview Course structure Requirements Fees Enquire online Overview
What is the Working at Heights Course? This training is designed to equip learners with the knowledge, skills and attitudes to work at height safely, thereby minimising the risk and increasing chances of survival should a fall occur. DURATION 1 day CERTIFICATE VALIDITY 3 years Contact Us for More Info Working at Heights Course Gallery
Working at height means performing any function in an elevated position, where precautions must be taken to safeguard workers. This extends to scaffolds, ladders, stages and raised platforms, along with any work that takes place alongside a deep trench. The purpose of this course is to empower employers and employees alike with the knowledge ...
Our working at heights online course recognises the national measures for working at heights safely, and gives candidates the knowledge to plan, select and use the correct equipment. Course duration: Between 2 and 2 ½ hrs depending on learning speed. Course format: Three video training modules, with a multiple-choice section at the end of each ...
The training and assessment of the [email protected] course are competencies based so the time of the course is dependent on a learner's previous experience, capabilities, and abilities.. The typical duration of this full Working at Heights course is 1 day. A Work Safely at Heights Refresher Course is also available with us.
Working Safely at Heights Training Melbourne. Now $199. Heights Tickets. RIIWHS204E Work Safely At Heights. Heights training course for Solar, Construction, Telecoms, Warehousing, Manufacturing. Just about everyone. 041 578 9820 [email protected] Mon - Fri: 9:30 AM — 5:30 PM Toggle navigation Home About Courses
Confined Space and Working Safely at Heights and Gas Test. Combo $500 Our Courses are provided under Aupice with The Scaffold Tool and Training Company RTO#22226 Confined Space Ticket $220 Course Info Gas Test Atmospheres $150 Course Info Traffic Training $180 Course Info Breathing Apparatus Course Info Working safely at heights $199 Course Info
In providing training services and solutions, we see ourselves enabling change for every individual with whom we work with. NTUC LearningHub Pte Ltd. CPE/UEN No: 200409359E 26 Nov 2022 to 25 Nov 2026 Useful Links
+61 387838138. Home; Psu social work course map; Visas. Business Visa; Approaches of case study research
This course has been designed to meet the minimum standard for working-at-height Training for Supervisors, Assessors or Managers in Singapore, as recommended in the WSH (Work at Heights) Regulations 2013 and the Approved Code of Practice for Working Safely at Height (2011). Next available schedule See All Schedules Course Objectives
Our Working at Heights Course is CPO Approved and teaches principles on how to safely work at heights. (416/877) 410-1855. 24/7 (No Shift Premiums) SIGN UP. LOGIN. TRAINING. ELEVATED WORK PLATFORM TRAINING; FALL PROTECTION TRAINING; FORKLIFT | LIFT TRUCK TRAINING;
From: $ 199.99. Working at Heights (Full Course) Information: Course Time: 8:00 AM-4:30 PM (8.5 Hours) Category: Working at Heights New Tag: Working at Heights. Description. Additional information.
Working at Heights training can be done at COVE Training. 1 day nationally recognised course that gives you the skills to work at heights. Skip to content STUDENT LOGIN 03 8773 9000
Course Overview Pinnacle Safety and Training train more people to work safely at heights than any other provider in Australia. This nationally recognised course covers theoretical and practical aspects of working at height. During the course we will assist you to develop safe work method statements and risk assessments for working at height.
Working at Heights Stage 3. NZQA: 17600, 23229, 15757, 25045. Working at Heights Stage 3 is available online followed by a practical session or delivered in-person by one of our experienced tutors. If you are supervising others work at height using and setting up a fall arrest system it is important that you have the correct training to perform ...